Merge branch 'master' into develop-snster

README.md

@@ -20,18 +20,24 @@ Nous utilisons :
 
 Vous avez besoin de [vagrant](https://www.vagrantup.com/), [VirtualBox](https://www.virtualbox.org/) et éventuellement git.
 
+UDP/53 ne doit pas être filtré depuis votre poste (par un firewall d'entreprise par exemple). Pour tester:
+```bash
+# dig @80.67.169.12 www.kaz.bzh
+```
+
 ## Installation
 
 * Télécharger le dépôt kaz-vagrant, branche develop-snster, ou utilisez la commande git :
 ```bash
 git clone https://git.kaz.bzh/KAZ/kaz-vagrant.git # pour essayer
 git clone git+ssh://git@git.kaz.bzh:2202/KAZ/kaz-vagrant.git # pour contribuer
-git switch develop-snster # dans les 2 cas
 cd kaz-vagrant/
+git switch develop-snster # dans les 2 cas
 ```
 * Personalisez votre simulateur avec la commande (au besoin ajustez la mémoire et les cpus utilisés dans Vagrantfile) :
 ```bash
 vagrant plugin install vagrant-disksize
+vagrant plugin install vagrant-vbguest
 ./init.sh  # vous pouvez laisser les choix par défaut
 ```
 * Pour créer tout l'univers Kaz il faut se placer dans le répertoire et lancer la commande :
@@ -90,7 +96,10 @@ Vous pouvez alors (toutes les commandes snster doivent être exécutées dans `/
     * `email@isp-a.sns`, hébergé dans le conteneur LXC isp-a-infra
 * Travailler sur kaz-prod : `snster attach kaz-prod`
 * Afficher un plan de réseau : `snster print`
-* Il est probablement pratique d'installer son environnement de développement sur la VM, avec ses clés SSH et son éditeur favori. Les fichiers de kaz-prod sont accessibles, depuis la VM, dans le dossier `/var/lib/lxc/kaz-kaz-prod/overlay/delta/` (à confirmer que c'est 100% synchronisé entre VM et conteneur LXC)
+* Le système de fichiers de kaz-prod est accessible directement dans la VM:
+  * `/kaz-prod/` [VM] correspond à `/` [kaz-prod]
+  * `/kaz` [VM] correspond à `/kaz` [kaz-prod]
+* Il est probablement pratique d'installer son environnement de développement sur la VM, avec ses clés SSH et son éditeur favori.
 
 Il y a un aperçu de l'état des services avec l'url https://kaz.sns/status/allServices.html
 

Vagrantfile.dist

@@ -86,6 +86,7 @@ Vagrant.configure("2") do |config|
 
   #permet d'avoir un répertoire partagé entre la VM et le host
   config.vm.synced_folder "/tmp/", "/tmp_host"
+  config.vm.synced_folder "files/", "/root/kaz-vagrant"
 
  config.vm.provision "shell" do |s|
     s.inline = "/vagrant/files/vm-provision.sh"

files/snster-kaz/isp-a/group.yml

@@ -27,7 +27,7 @@ hosts:
           neighbors4: 100.64.0.1 as 30
           neighbors6: 2001:db8:b000::1 as 30
       - resolv:
-          nameserver: 100.100.100.100
+          ns: 100.100.100.100
           domain: isp-a.sns
 
   infra:
@@ -43,9 +43,10 @@ hosts:
       - mailserver:
           domain: isp-a.sns
       - resolverns:
+          roots: p,100.100.1.10,2001:db8:a001::10
       - resolv:
           domain: isp-a.sns
-          ns: 100.120.1.2
+          ns: 100.100.100.100
 
   home:
     network:
@@ -58,4 +59,4 @@ hosts:
       - updatecaroots:
       - resolv:
           domain: isp-a.sns
-          ns: 100.120.1.2
+          ns: 100.100.100.100

files/snster-kaz/isp-a/infra/dns.conf

@@ -7,3 +7,9 @@ server:
   local-data: "mail.isp-a.sns. IN A 100.120.1.2"
   local-data: "ns.isp-a.sns. IN A 100.120.1.2"
   local-data: "isp-a.sns. IN MX 10 smtp.isp-a.sns."
+
+  local-zone: "120.100.in-addr.arpa." static
+  local-data: "2.1.120.100.in-addr.arpa. IN PTR smtp.isp-a.sns"
+  local-data: "2.0.120.100.in-addr.arpa. IN PTR home.isp-a.sns"
+  local-data: "1.1.120.100.in-addr.arpa. IN PTR router.isp-a.sns"
+  local-data: "1.0.120.100.in-addr.arpa. IN PTR router.isp-a.sns"

files/snster-kaz/kaz/group.yml

@@ -26,7 +26,7 @@ hosts:
           neighbors4: 100.64.0.1 as 30
           neighbors6: 2001:db8:b000::1 as 30
       - resolv:
-          nameserver: 100.100.100.100
+          ns: 100.100.100.100
           domain: kaz.sns
 
   prod:
@@ -42,7 +42,7 @@ hosts:
     templates:
       - updatecaroots:
       - authns:
-          zonefile: dns.conf
+          zonefiles: kaz.sns.zone;80.100.in-addr.arpa.zone
       - resolv:
           domain: kaz.sns
           ns: 100.100.100.100

files/snster-kaz/kaz/prod/80.100.in-addr.arpa.zone

@@ -0,0 +1,16 @@
+$TTL	86400
+$ORIGIN 80.100.in-addr.arpa.
+@  1D  IN  SOA ns.kaz.sns. hostmaster.kaz.sns. (
+			      2002022401 ; serial
+			      3H ; refresh
+			      15 ; retry
+			      1w ; expire
+			      3h ; nxdomain ttl
+			     )
+       IN  NS     ns.kaz.sns.
+ns    IN  A      100.80.0.2
+ns		IN	AAAA		2001:db8:80::0:2
+2.0		IN	PTR 		smtp.kaz.sns.
+1.0		IN	PTR			router.kaz.sns.
+1.1		IN	PTR			router.kaz.sns.
+2.1		IN	PTR			listes.kaz.sns.

files/snster-kaz/kaz/prod/kaz.sns.zone

@@ -24,6 +24,7 @@ wiki	IN	CNAME	dmz
 git	IN	CNAME	dmz
 office	IN	CNAME	dmz
 depot	IN	CNAME	dmz
+ldap	IN	CNAME	dmz
 listes	IN	MX	10	listes
 listes	IN	A	100.80.1.2
 firewall   IN A 100.80.0.1

files/snster-kaz/kaz/prod/kaz/config/dockers.env

@@ -98,7 +98,7 @@ sympaDBName=sympaDB
 vigiloDBName=vigiloDB
 wordpressDBName=wpDB
 
-ldapIUName=ldapIU
+ldapUIName=ldapUI
 
 ########################################
 # politique de redémarrage
@@ -112,7 +112,7 @@ restartPolicy=no
 
 jirafeauDir=/var/jirafeauData/lkuDM16R5Sp4QHr/
 
-ldapRoot=dc=kaz,dc=sns
+ldap_root=dc=kaz,dc=sns
 
 ########################################
 # services activés par container.sh

files/snster-kaz/kaz/prod/provision.sh

@@ -18,7 +18,7 @@ DEBIAN_FRONTEND=noninteractive apt-get autoremove -y
 # KAZ specific things
 #installation de docker, docker-compose et on y fourre le user debian dans le groupe idoine
 
-DEBIAN_FRONTEND=noninteractive apt-get install -y docker.io docker-compose docker-clean git apg curl sudo unzip rsync fuse-overlayfs
+DEBIAN_FRONTEND=noninteractive apt-get install -y docker.io docker-compose docker-clean git apg curl sudo unzip rsync btrfs-progs ldap-utils # fuse-overlayfs 
 usermod -G docker debian
 # activation dans alias dans /root/.bashrc
 sed -i \
@@ -49,13 +49,23 @@ echo "export SNSTERGUARD='true'" >> /root/.bashrc
 
 # On active fuse-overlayfs pour docker
 cat >> /etc/docker/daemon.json <<EOF
-{ "storage-driver": "fuse-overlayfs" }
+{ "storage-driver": "btrfs" }
 EOF
 service docker restart
 
-mknod -m 666 /dev/fuse c 10 229
-echo -e '#!/bin/sh\nmknod -m 666 /dev/fuse c 10 229' >> /etc/rc.local
-chmod +x /etc/rc.local
+#mknod -m 666 /dev/fuse c 10 229
+#echo -e '#!/bin/sh\nmknod -m 666 /dev/fuse c 10 229' >> /etc/rc.local
+#chmod +x /etc/rc.local
+
+# lxc.cgroup2.devices.allow = b 7:* rwm
+# lxc.cgroup2.devices.allow = c 10:237 rwm
+#
+# mknod -m 666 /dev/loop0 b 7 0
+# mknod -m 666 /dev/loop-control c 10 237
+# truncate -s 30G /root/varlibdocker.img
+# mkfs.btrfs /root/varlibdocker.img
+# losetup -f /root/varlibdocker.img
+# mount /dev/loop0 /var/lib/docker
 
 # On place les certifs
 if  [ -d letsencrypt ]; then

files/snster-kaz/main.yml

@@ -29,5 +29,6 @@ masters:
     family: alpine
 
 disabled-groups:
-  #- target
-  #- root-o
+  - _global
+  - _templates
+  - _masters

files/snster-kaz/mica/group.yml

@@ -24,7 +24,7 @@ hosts:
           neighbors4: 100.64.0.1 as 30
           neighbors6: 2001:db8:b000::1 as 30
       - resolv:
-          nameserver: 100.100.100.100
+          ns: 100.100.100.100
           domain: mica.sns
 
   infra:

files/snster-kaz/opendns/group.yml

@@ -24,7 +24,7 @@ hosts:
           neighbors4: 100.64.0.1 as 30
           neighbors6: 2001:db8:b000::1 as 30
       - resolv:
-          nameserver: 100.100.100.100
+          ns: 100.100.100.100
           domain: opendns.sns
 
   resolver:
@@ -38,6 +38,7 @@ hosts:
       gatewayv6: 2001:db8:a100::1
     templates:
       - resolverns:
+          roots: p,100.100.1.10,2001:db8:a001::10
       - resolv:
           domain: opendns.sns
           ns: 100.100.100.100

files/snster-kaz/opendns/resolver/provision.sh

@@ -0,0 +1,32 @@
+#!/bin/bash
+set -e
+if [ -z $SNSTERGUARD ] ; then exit 1; fi
+DIR=`dirname $0`
+cd `dirname $0`
+
+mkdir -p /etc/unbound/unbound.conf.d/
+
+cat >> /etc/unbound/unbound.conf.d/unblockdns.conf <<EOF
+stub-zone:
+  name: "sns"
+  stub-addr: 100.100.20.10
+
+stub-zone:
+  name: "100.in-addr.arpa"
+  stub-addr: 100.100.1.10
+
+forward-zone:
+  name: "."
+  forward-addr: 100.64.0.1
+EOF
+
+# notes
+# apt install build-essential libnghttp2-dev libssl-dev libexpat-dev
+# wget https://nlnetlabs.nl/downloads/unbound/unbound-1.17.1.tar.gz
+# ./configure --with-libnghttp2
+# adduser unbound
+
+# fixdns.sh
+# SNSTER="snster -c /root/snster-kaz attach $1 -x"
+# $SNSTER "DEBIAN_FRONTEND=noninteractive apt-get install -y  nss-tlsd libnss-tls"
+# $SNSTER "sed -i -e 's/^hosts:\s*files/hosts:\tfiles tls/' /etc/nsswitch.conf"

files/snster-kaz/root-p/group.yml

@@ -24,7 +24,7 @@ hosts:
           neighbors4: 100.64.0.1 as 30
           neighbors6: 2001:db8:b000::1 as 30
       - resolv:
-          nameserver: 100.100.100.100
+          ns: 100.100.100.100
           domain: ns-root-p.sns
 
   rootns:
@@ -38,6 +38,9 @@ hosts:
       gatewayv6: 2001:db8:a001::1
     templates:
       - rootns:
+          roots: p,100.100.1.10,2001:db8:a001::10
+          tlds: sns,100.100.20.10,2001:db8:a020::10
+          reverse: reverse.zone
       - resolv:
           domain: ns-root-p.sns
           ns: 100.100.100.100

files/snster-kaz/root-p/rootns/reverse.zone

@@ -0,0 +1,5 @@
+120.100.in-addr.arpa.		172800	IN	NS	p.120.100.in-addr.arpa.
+p.120.100.in-addr.arpa.              172800  IN      A       100.120.1.2
+p.120.100.in-addr.arpa.              172800  IN      AAAA     2001:db8:120:1::2
+80.100.in-addr.arpa.		172800	IN	NS	p.80.100.in-addr.arpa.
+p.80.100.in-addr.arpa.              172800  IN      A       100.80.0.2

files/snster-kaz/tld-sns/group.yml

@@ -24,7 +24,7 @@ hosts:
           neighbors4: 100.64.0.1 as 30
           neighbors6: 2001:db8:b000::1 as 30
       - resolv:
-          nameserver: 100.100.100.100
+          ns: 100.100.100.100
           domain: tld-sns.sns
 
   ns:

files/snster-kaz/transit-a/group.yml

@@ -23,5 +23,5 @@ hosts:
           neighbors4: 100.64.0.10 as 10;100.64.0.30 as 7;100.64.0.40 as 8; 100.64.0.20 as 6; 100.64.0.50 as 13; 100.64.0.110 as 20; 100.64.1.140 as 12
           neighbors6: 2001:db8:b000::10 as 10; 2001:db8:b000::30 as 7;2001:db8:b000::40 as 8; 2001:db8:b000::20 as 6; 2001:db8:b000::50 as 13; 2001:db8:b000::110 as 20; 2001:db8:b001::140 as 12
       - resolv:
-          nameserver: 100.100.100.100
+          ns: 100.100.100.100
           domain: transit-a.sns

files/snster-kaz/transit-a/router/provision.sh

@@ -33,3 +33,8 @@ protocol static {
 	route 0.0.0.0/0 via 100.64.0.1;
 }
 " >> /etc/bird.conf
+
+
+# Add dnsmasq for external dns
+apk add dnsmasq
+rc-update add dnsmasq

files/templates/debian/resolverns/provision.sh

@@ -1,41 +0,0 @@
-#!/bin/bash
-# Root NS template
-set -e
-if [ -z $SNSTERGUARD ] ; then exit 1; fi
-DIR=`dirname $0`
-cd `dirname $0`
-
-# disable systemd-resolved which conflicts with nsd
-echo "DNSStubListener=no" >> /etc/systemd/resolved.conf
-systemctl stop systemd-resolved
-
-apt-get update
-DEBIAN_FRONTEND=noninteractive apt-get install -y unbound dnsutils
-
-# get root hints
-#wget "http://www.internic.net/domain/named.root" -O /etc/unbound/root.hints
-echo -e ".												3600000      NS    P.ROOT-SERVERS.NET.
-P.ROOT-SERVERS.NET.      3600000      A     100.100.1.10
-P.ROOT-SERVERS.NET.      3600000      AAAA     2001:db8:a001::10
-" > /etc/unbound/root.hints
-
-# customize unbound config
-#echo -e "server:
-#	ip-address: 127.0.0.1
-echo -e "server:
-	root-hints: root.hints
-" > /etc/unbound/unbound.conf.d/root.conf
-
-# no DNSSEC validation for now
-sed -i "s/auto/\#auto/" /etc/unbound/unbound.conf.d/root-auto-trust-anchor-file.conf
-
-# Be an open dns resolver -- TO CHANGE LATER
-echo -e "server:
-	interface: 0.0.0.0
-  access-control: 0.0.0.0/0 allow
-	cache-max-ttl: 20
-	cache-min-ttl: 10
-	cache-max-negative-ttl: 20
-" > /etc/unbound/unbound.conf.d/listen.conf
-
-service unbound restart

files/templates/debian/rootns/provision.sh

@@ -1,42 +0,0 @@
-#!/bin/bash
-# Root NS template
-set -e
-if [ -z $SNSTERGUARD ] ; then exit 1; fi
-DIR=`dirname $0`
-cd `dirname $0`
-
-# disable systemd-resolved which conflicts with nsd
-echo "DNSStubListener=no" >> /etc/systemd/resolved.conf
-systemctl stop systemd-resolved
-
-apt-get update
-DEBIAN_FRONTEND=noninteractive apt-get install -y nsd
-
-# get root zone
-wget "http://www.internic.net/domain/root.zone" -O /etc/nsd/root.zone
-
-# customize root zone
-# remove official roots
-sed -i -e 's/^\.\s.*NS.*[a-m].root-servers.net.*//' /etc/nsd/root.zone
-# add alternative milxc root
-
-echo -e ".	518400	IN	NS	p.root-servers.net
-p.root-servers.net	518400	IN	A 100.100.1.10
-p.root-servers.net	518400	IN	AAAA     2001:db8:a001::10
-" >> /etc/nsd/root.zone
-
-
-# add .sns TLD served by 100.100.20.10
-echo -e "sns.	518400	IN	NS	ns.sns.
-ns.sns.	518400	IN	A 100.100.20.10
-ns.sns.	518400	IN	AAAA 2001:db8:a020::10" >> /etc/nsd/root.zone
-
-# customize nsd config
-#echo -e "server:
-#	ip-address: 127.0.0.1
-echo -e "zone:
-	name: \".\"
-	zonefile: \"root.zone\"
-" > /etc/nsd/nsd.conf
-
-#service nsd restart

files/vm-install-kaz.sh

@@ -5,16 +5,16 @@ if [ -z "${KAZGUARD}" ] ; then
     exit 1
 fi
 
-snster -c /root/snster-kaz -t /root/templates start
+snster -c /root/snster-kaz start
 sleep 10
-snster -c /root/snster-kaz -t /root/templates attach kaz-prod -x /mnt/snster/root/snster-kaz/kaz/prod/kaz.sh
+snster -c /root/snster-kaz attach kaz-prod -x /mnt/snster/root/snster-kaz/kaz/prod/kaz.sh
 
 # On crée quelques mails
 SETUP_MAIL="docker exec mailServ setup"
-snster -c /root/snster-kaz -t /root/templates attach kaz-prod -x "${SETUP_MAIL} email add contact1@kaz.sns toto"
-snster -c /root/snster-kaz -t /root/templates attach kaz-prod -x "${SETUP_MAIL} email add contact2@kaz.sns toto"
-snster -c /root/snster-kaz -t /root/templates attach kaz-prod -x "${SETUP_MAIL} email add contact3@kaz.sns toto"
-snster -c /root/snster-kaz -t /root/templates attach kaz-prod -x "${SETUP_MAIL} email add contact4@kaz.sns toto"
+snster -c /root/snster-kaz attach kaz-prod -x "${SETUP_MAIL} email add contact1@kaz.sns toto"
+snster -c /root/snster-kaz attach kaz-prod -x "${SETUP_MAIL} email add contact2@kaz.sns toto"
+snster -c /root/snster-kaz attach kaz-prod -x "${SETUP_MAIL} email add contact3@kaz.sns toto"
+snster -c /root/snster-kaz attach kaz-prod -x "${SETUP_MAIL} email add contact4@kaz.sns toto"
 
 echo -e '#!/bin/sh\nsnster -c /root/snster-kaz start' >> /etc/rc.local
 chmod +x /etc/rc.local

files/vm-provision.sh

@@ -40,7 +40,7 @@ export DebugLog="${VAGRANT_SRC_DIR}/log/log-vagrant-$(date +%y-%m-%d-%T)-"
     DEBIAN_FRONTEND=noninteractive apt-get --allow-releaseinfo-change update
     DEBIAN_FRONTEND=noninteractive apt-get -y upgrade
     DEBIAN_FRONTEND=noninteractive apt-get -y dist-upgrade
-    DEBIAN_FRONTEND=noninteractive apt-get install -y apg curl git sudo unzip rsync firefox-esr tcpdump net-tools mousepad wireshark swapspace whois ldap-utils python3-lxc lxc python3-pygraphviz python3-pil python3-yaml imagemagick # could be with --no-install-recommends
+    DEBIAN_FRONTEND=noninteractive apt-get install -y apg curl git sudo unzip rsync firefox-esr tcpdump net-tools mousepad wireshark swapspace whois ldap-utils python3-lxc lxc python3-pygraphviz python3-pil python3-yaml imagemagick btrfs-progs # could be with --no-install-recommends
     DEBIAN_FRONTEND=noninteractive apt-get install -y xfce4 lightdm xfce4-terminal xserver-xorg gitk # needs to install recommends
 
     ssh-keygen -t rsa -b 4096 -N '' <<<$'\ny'
@@ -180,20 +180,45 @@ EOF
     cd
     git clone https://framagit.org/flesueur/snster.git
     cd snster
+    # git checkout tags/v1.1.0
+    git checkout fe59ef1f
     ./install.sh
 
+    # BTRFS avec hotfix sale de SNSTER
+    freespace=`df /root | awk '/[0-9]%/{print $(NF-2)}'`
+    btrsize=$(( $freespace - 5000000 )) # on laisse 5GB libres
+    truncate -s ${btrsize}k /root/btrfs.img
+    mkfs.btrfs -f /root/btrfs.img
+    echo "/root/btrfs.img	/var/lib/lxc	btrfs	loop	0	0" >> /etc/fstab
+    mount /var/lib/lxc
+    #losetup -f /root/btrfs.img
+    #mount /dev/loop0 /var/lib/lxc
+    sed -i -e "s/template=self.template/template=self.template, bdevtype='btrfs'/" /usr/local/lib/python3.9/dist-packages/backends/LxcBackend.py
+
     # SNSTER KAZ
-    cp -ar ${VAGRANT_SRC_DIR}/templates /root
+    # cp -ar ${VAGRANT_SRC_DIR}/templates /root
     cp -ar ${VAGRANT_SRC_DIR}/snster-kaz /root
 
     # crypto keys
     cp -ar /etc/letsencrypt /root/snster-kaz/kaz/prod/
     cp -ar /etc/letsencrypt /root/snster-kaz/isp-a/home/
 
+    # On monte le filesystem de kaz-prod dans le /kaz de la VM pour le dév (en nofail)
+#    mkdir /kaz-prod /kaz
+#    echo "overlay	/kaz-prod	overlay	lowerdir=/var/lib/lxc/sr-masters-bullseye/rootfs,upperdir=/var/lib/lxc/kaz-kaz-prod/overlay/delta,workdir=/var/lib/lxc/kaz-kaz-prod/overlay/work,nofail  0 0" >> /etc/fstab
+#    echo "/kaz-prod/kaz /kaz  none  bind,nofail  0 0" >> /etc/fstab
+    ln -s /var/lib/lxc/kaz-kaz-prod/rootfs/ /kaz-prod
+    ln -s /kaz-prod/kaz /kaz
+
+    # On met le KAZGUARD pour la mise au point
+    echo "export KAZGUARD='true'" >> /root/.bashrc
+
     # Build SNSTER KAZ !
-    snster -c /root/snster-kaz -t /root/templates create
+    snster -c /root/snster-kaz create
     cp "${VAGRANT_SRC_DIR}/vm-install-kaz.sh" /root/
     chmod +x /root/vm-install-kaz.sh
+    cp "${VAGRANT_SRC_DIR}/vm-upgrade.sh" /root/
+    chmod +x /root/vm-upgrade.sh
     if [ "${NOKAZ}" == "true" ]; then
       echo "on ne fait pas l'install de kaz sur kaz-prod"
     else
@@ -201,11 +226,6 @@ EOF
       bash "/root/vm-install-kaz.sh"
     fi
 
-    # On monte le filesystem de kaz-prod dans le /kaz de la VM pour le dév (en nofail)
-    mkdir /kaz-prod /kaz
-    echo "overlay	/kaz-prod	overlay	lowerdir=/var/lib/lxc/sr-masters-bullseye/rootfs,upperdir=/var/lib/lxc/kaz-kaz-prod/overlay/delta,workdir=/var/lib/lxc/kaz-kaz-prod/overlay/work,nofail  0 0" >> /etc/fstab
-    echo "/kaz-prod/kaz /kaz  none  bind,nofail  0 0" >> /etc/fstab
-
     echo "########## ********** End Vagrant $(date +%D-%T)"
 )  > >(tee ${DebugLog}stdout.log) 2> >(tee ${DebugLog}stderr.log >&2)
 

files/vm-upgrade.sh

@@ -0,0 +1,47 @@
+#!/bin/bash
+# Upgrade de tout sauf kaz-prod
+
+if [ -z "${KAZGUARD}" ] ; then
+    exit 1
+fi
+set -e
+
+# On met à jour SNSTER
+cd /root/snster
+git switch main
+git pull
+./install.sh
+# hotfix pour btrfs
+sed -i -e "s/template=self.template/template=self.template, bdevtype='btrfs'/" /usr/local/lib/python3.9/dist-packages/backends/LxcBackend.py
+
+# On récupère le dernier kaz-vagrant
+cd /tmp
+git clone https://git.kaz.bzh/KAZ/kaz-vagrant.git || (cd kaz-vagrant && git pull)
+cd /tmp/kaz-vagrant
+git switch develop-snster
+
+# On écrase les anciens fichiers
+cp -ar /tmp/kaz-vagrant/files/snster-kaz /root/
+# crypto keys
+cp -ar /etc/letsencrypt /root/snster-kaz/kaz/prod/
+cp -ar /etc/letsencrypt /root/snster-kaz/isp-a/home/
+
+# On détruit et reconstruit tout sauf kaz-prod
+SNSTER="snster -c /root/snster-kaz"
+$SNSTER destroy isp-a-home
+$SNSTER destroy isp-a-infra
+$SNSTER destroy isp-a-router
+$SNSTER destroy kaz-router
+$SNSTER destroy mica-router
+$SNSTER destroy mica-infra
+$SNSTER destroy opendns-router
+$SNSTER destroy opendns-resolver
+$SNSTER destroy root-p-router
+$SNSTER destroy root-p-rootns
+$SNSTER destroy tld-sns-router
+$SNSTER destroy tld-sns-ns
+$SNSTER destroy transit-a-router
+
+$SNSTER create
+
+$SNSTER start

sparsify.sh

@@ -3,14 +3,14 @@
 set -e
 
 # Get HD filename
-FILENAME=`vboxmanage showvminfo kaz-dev-amd64 | grep SATA | grep UUID | cut -d':' -f2 | cut -d'(' -f1 | sed -e 's/^[ \t]*//' |  sed -e 's/[ \t]*$//'`
+FILENAME=`vboxmanage showvminfo kaz-vm | grep SATA | grep UUID | cut -d':' -f2 | cut -d'(' -f1 | sed -e 's/^[ \t]*//' |  sed -e 's/[ \t]*$//'`
 
 # Split the dir and filename
 DIR=`dirname "$FILENAME"`
 FILE=`basename "$FILENAME"`
 
 # Get HD UUID
-UUID=`vboxmanage showvminfo kaz-dev-amd64 | grep SATA | grep UUID | cut -d':' -f 3| cut -d')' -f1 | sed -e 's/^[ \t]*//' |  sed -e 's/[ \t]*$//'`
+UUID=`vboxmanage showvminfo kaz-vm | grep SATA | grep UUID | cut -d':' -f 3| cut -d')' -f1 | sed -e 's/^[ \t]*//' |  sed -e 's/[ \t]*$//'`
 
 # echo -e $DIR
 # echo -e $FILE

trim_enable.sh

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+
+set -e
+
+# Get HD UUID
+HDUUID=`vboxmanage showvminfo kaz-vm --machinereadable | grep ImageUUID | cut -d= -f2 | sed -e "s/\"//g"`
+
+# Get storage controller
+STCTRL=`vboxmanage showvminfo kaz-vm --machinereadable | grep storagecontrollername0 | cut -d= -f2 | sed -e "s/\"//g"`
+
+#echo -e $HDUUID
+#echo -e $STCTRL
+
+vboxmanage storageattach kaz-vm --medium="$HDUUID" --storagectl="${STCTRL}" --port=0 --discard=on --nonrotational=on
+
+echo "Trim enabled !"