KAZ/kaz-vagrant
2
0
Fork 0
Code Issues Pull Requests Projects Releases 1 Wiki Activity

Migration de la VM vers SNSTER #1

Merged
francois.lesueur merged 5 commits from develop-snster into master 2023-03-01 15:28:08 +01:00
Conversation 0 Commits 5 Files Changed 7 +119 -336
7 changed files with 119 additions and 336 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
.gitignore vendored
View File

@ -1,10 +1,11 @@
.apt-mirror-config
.customDocker.sh
.customVM.sh
.proxy-config
.vagrant
DEADJOE
Vagrantfile
/files/log
/files/kaz/download
/files/kaz/git
/files/kaz/log
/files/customVM.sh

14
README.md
View File

@ -20,10 +20,6 @@ Nous utilisons :
Vous avez besoin de [vagrant](https://www.vagrantup.com/), [VirtualBox](https://www.virtualbox.org/) et éventuellement git.
UDP/53 ne doit pas être filtré depuis votre poste (par un firewall d'entreprise par exemple). Pour tester:
```bash
# dig @80.67.169.12 www.kaz.bzh
```
## Installation
@ -34,18 +30,14 @@ git clone git+ssh://git@git.kaz.bzh:2202/KAZ/kaz-vagrant.git # pour contribuer
cd kaz-vagrant/
git switch develop-snster # dans les 2 cas
```
* Personalisez votre simulateur avec la commande (au besoin ajustez la mémoire et les cpus utilisés dans Vagrantfile) :
```bash
vagrant plugin install vagrant-disksize
vagrant plugin install vagrant-vbguest
./init.sh # vous pouvez laisser les choix par défaut
```
* (Optionnel) Ajustez éventuellement la mémoire et les cpus utilisés dans Vagrantfile (par défaut 4GB et 2 vCPUs)
* Pour créer tout l'univers Kaz il faut se placer dans le répertoire et lancer la commande :
```bash
vagrant up
```
Cette étape peut-être (très) longue. Notamment, la construction de kaz-prod se fait dans un conteneur LXC, dans lequel les overlays docker passent par un filesystem FUSE beaucoup plus lent qu'en natif...
Cette étape peut-être (très) longue. Notamment, la construction de kaz-prod se fait dans un conteneur LXC, dans lequel les overlays docker passent par un filesystem plus lent qu'en natif... Comptez entre 40 minutes et quelques heures, selon la connexion réseau et les performances de la machine.
## Mise au point

50
Vagrantfile vendored Normal file
View File

@ -0,0 +1,50 @@
# coding: utf-8
# -*- mode: ruby -*-
# vi: set ft=ruby :
unless Vagrant.has_plugin?("vagrant-disksize")
raise Vagrant::Errors::VagrantError.new, "vagrant-disksize plugin is missing. Please install it using 'vagrant plugin install vagrant-disksize' and rerun 'vagrant up'"
end
# All Vagrant configuration is done below. The "2" in Vagrant.configure
# configures the configuration version (we support older styles for
# backwards compatibility). Please don't change it unless you know what
# you're doing.
Vagrant.configure("2") do |config|
required_plugins = %w( vagrant-vbguest vagrant-disksize )
_retry = false
required_plugins.each do |plugin|
unless Vagrant.has_plugin? plugin
system "vagrant plugin install #{plugin}"
_retry=true
end
end
if (_retry)
exec "vagrant " + ARGV.join(' ')
end
config.vm.box = "debian/bullseye64"
config.vm.hostname = 'kaz-vm'
config.disksize.size = '32GB'
config.vm.provider "virtualbox" do |vb|
vb.memory = "4096"
vb.cpus = "2"
vb.name = "kaz-vm"
vb.customize ["modifyvm", :id, "--vram", "64", "--clipboard-mode", "bidirectional", '--graphicscontroller', 'vmsvga', '--natnet1', '192.168.64.0/24']
vb.gui = true
end
#permet d'avoir un répertoire partagé entre la VM et le host
config.vm.synced_folder "/tmp/", "/tmp_host"
config.vm.synced_folder "files/", "/root/kaz-vagrant"
config.vm.provision "shell" do |s|
s.inline = "/vagrant/files/vm-provision.sh"
s.env = {"KAZGUARD" => "true", "HOSTLANG" => ENV['LANG'], "NOKAZ" => ENV['NOKAZ'], "KAZBRANCH" => ENV['KAZBRANCH']}
end
end

95
Vagrantfile.dist
View File

@ -1,95 +0,0 @@
# coding: utf-8
# -*- mode: ruby -*-
# vi: set ft=ruby :
unless Vagrant.has_plugin?("vagrant-disksize")
raise Vagrant::Errors::VagrantError.new, "vagrant-disksize plugin is missing. Please install it using 'vagrant plugin install vagrant-disksize' and rerun 'vagrant up'"
end
# All Vagrant configuration is done below. The "2" in Vagrant.configure
# configures the configuration version (we support older styles for
# backwards compatibility). Please don't change it unless you know what
# you're doing.
Vagrant.configure("2") do |config|
required_plugins = %w( vagrant-vbguest vagrant-disksize )
_retry = false
required_plugins.each do |plugin|
unless Vagrant.has_plugin? plugin
system "vagrant plugin install #{plugin}"
_retry=true
end
end
if (_retry)
exec "vagrant " + ARGV.join(' ')
end
config.vm.box = "debian/bullseye64"
config.vm.hostname = 'kaz-vm'
config.disksize.size = '32GB'
# Disable automatic box update checking. If you disable this, then
# boxes will only be checked for updates when the user runs
# `vagrant box outdated`. This is not recommended.
# config.vm.box_check_update = false
# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine. In the example below,
# accessing "localhost:8080" will access port 80 on the guest machine.
# config.vm.network "forwarded_port", guest: 80, host: 8080
# Create a private network, which allows host-only access to the machine
# using a specific IP.
# config.vm.network "private_network", ip: "192.168.33.10"
# Create a public network, which generally matched to bridged network.
# Bridged networks make the machine appear as another physical device on
# your network.
# config.vm.network "public_network"
# Share an additional folder to the guest VM. The first argument is
# the path on the host to the actual folder. The second argument is
# the path on the guest to mount the folder. And the optional third
# argument is a set of non-required options.
# config.vm.synced_folder "data", "/vagrant_data"
# config.vm.synced_folder "..", "/root/mi-lxc", create:true, type:"rsync",
# rsync__exclude: [".git/", "zzlocal/", "vagrant/"]
# Provider-specific configuration so you can fine-tune various
# backing providers for Vagrant. These expose provider-specific options.
# Example for VirtualBox:
#
config.vm.provider "virtualbox" do |vb|
# # Display the VirtualBox GUI when booting the machine
# vb.gui = true
#
# # Customize the amount of memory on the VM:
vb.memory = "4096"
vb.cpus="2"
vb.name = "kaz-vm"
vb.customize ["modifyvm", :id, "--vram", "64", "--clipboard-mode", "bidirectional", '--graphicscontroller', 'vmsvga', '--natnet1', '192.168.64.0/24']
vb.gui = true
end
# Define a Vagrant Push strategy for pushing to Atlas. Other push strategies
# such as FTP and Heroku are also available. See the documentation at
# https://docs.vagrantup.com/v2/push/atlas.html for more information.
# config.push.define "atlas" do |push|
# push.app = "YOUR_ATLAS_USERNAME/YOUR_APPLICATION_NAME"
# end
# Enable provisioning with a shell script. Additional provisioners such as
# Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the
# documentation for more information about their specific syntax and use.
#permet d'avoir un répertoire partagé entre la VM et le host
config.vm.synced_folder "/tmp/", "/tmp_host"
config.vm.synced_folder "files/", "/root/kaz-vagrant"
config.vm.provision "shell" do |s|
s.inline = "/vagrant/files/vm-provision.sh"
s.env = {"KAZGUARD" => "true", "HOSTLANG" => ENV['LANG'], "NOKAZ" => ENV['NOKAZ'], "KAZBRANCH" => ENV['KAZBRANCH']}
end
end

21
files/snster-kaz/kaz/prod/provision.sh
View File

@ -80,6 +80,27 @@ fi
echo -e '#!/bin/sh\n/kaz/bin/container.sh start' >> /etc/rc.local
chmod +x /etc/rc.local
# On sauve le proxy APT
proxy=$(/sbin/ip route | awk '/default/ { print $3 }' | head -1)
sed -i -e "s/^proxy.*$/proxy=$proxy/" /usr/local/sbin/detect_proxy.sh
#echo "export http_proxy=\"http://$proxy:3142\"" > /etc/profile.d/proxy.sh
#echo "export https_proxy=\"http://$proxy:3142\"" >> /etc/profile.d/proxy.sh
mkdir /root/.docker
echo "{
\"proxies\":
{
\"default\":
{
\"httpProxy\": \"http://$proxy:3142\",
\"httpsProxy\": \"http://$proxy:3142\",
\"noProxy\": \"*.sns,127.0.0.0/8\"
}
}
}" > /root/.docker/config.json
echo "http_proxy=\"http://$proxy:3142\"
https_proxy=\"http://$proxy:3142\"
" >> /etc/default/docker
# clear apt cache
DEBIAN_FRONTEND=noninteractive apt-get autoremove -y
DEBIAN_FRONTEND=noninteractive apt-get clean

76
files/vm-provision.sh
View File

@ -15,49 +15,41 @@ mkdir -p "${VAGRANT_SRC_DIR}/log/"
export DebugLog="${VAGRANT_SRC_DIR}/log/log-vagrant-$(date +%y-%m-%d-%T)-"
(
echo "########## ********** Start Vagrant $(date +%D-%T)"
#pour la résolution de noms dans /etc/hosts
SERVICES_LIST="smtp mail ldap www depot tableur pad webmail sondage garradin test-garradin wiki git agora cloud office cachet quotas"
# Copie de qques fichiers
cp "${VAGRANT_SRC_DIR}/keyboard" /etc/default/keyboard
sysctl -w net.ipv4.ip_forward=1
# MAJ et install
# gestions sources.list
sed -i -e 's/main.*/main contrib non-free/' /etc/apt/sources.list
if [ -f "${VAGRANT_SRC_DIR}/.apt-mirror-config" ]; then
# pour ceux qui disposent d'un cache apt local et pas la fibre
# suffit d'indiquer "host:port" dans le fichier ".apt-mirror-config"
. "${VAGRANT_SRC_DIR}/.apt-mirror-config"
sed -i \
-e "s%s\?://deb.debian.org%://${APT_MIRROR_DEBIAN}%g" \
-e "s%s\?://security.debian.org%://${APT_MIRROR_DEBIAN_SECURITY}%g" \
-e "s%s\?://archive.ubuntu.com%://${APT_MIRROR_UBUNTU}%g" \
-e "s%s\?://security.ubuntu.com%://${APT_MIRROR_UBUNTU_SECURITY}%g" \
/etc/apt/sources.list
sed -i -e 's/https:/http:/' /etc/apt/sources.list
apt-get --allow-releaseinfo-change update
# Cache APT
#DEBIAN_FRONTEND=noninteractive apt-get install -y apt-cacher # apt-cacher-ng does not work well on bullseye
#echo "allowed_hosts = *" >> /etc/apt-cacher/apt-cacher.conf
#service apt-cacher restart
DEBIAN_FRONTEND=noninteractive apt-get install -y squid
sed -i -e "s/#http_access allow localnet/http_access allow localnet/" /etc/squid/squid.conf
echo "cache_dir aufs /var/spool/squid 5000 14 256
http_port 3142" >> /etc/squid/squid.conf
service squid restart
echo "Acquire::http::Proxy \"http://127.0.0.1:3142\";" > /etc/apt/apt.conf.d/01proxy; # utilisation de apt-cacher-ng
# Ajouter http://www.squid-cache.org/Doc/config/cache_peer/ à squid pour un proxy upstream
# Pour le confort de chacun, un customVM.sh optionnel
if [ -f "${VAGRANT_SRC_DIR}/customVM.sh" ]; then
bash "${VAGRANT_SRC_DIR}/customVM.sh"
fi
DEBIAN_FRONTEND=noninteractive apt-get --allow-releaseinfo-change update
# MAJ et Install
DEBIAN_FRONTEND=noninteractive apt-get -y upgrade
DEBIAN_FRONTEND=noninteractive apt-get -y dist-upgrade
DEBIAN_FRONTEND=noninteractive apt-get install -y apg curl git sudo unzip rsync firefox-esr tcpdump net-tools mousepad wireshark swapspace whois ldap-utils python3-lxc lxc python3-pygraphviz python3-pil python3-yaml imagemagick btrfs-progs # could be with --no-install-recommends
DEBIAN_FRONTEND=noninteractive apt-get install -y apg curl git sudo unzip rsync firefox-esr tcpdump net-tools mousepad wireshark swapspace whois python3-lxc lxc python3-pygraphviz python3-pil python3-yaml imagemagick btrfs-progs # could be with --no-install-recommends
DEBIAN_FRONTEND=noninteractive apt-get install -y xfce4 lightdm xfce4-terminal xserver-xorg gitk # needs to install recommends
ssh-keygen -t rsa -b 4096 -N '' <<<$'\ny'
rsync /root/.ssh/id_rsa.pub /root/.ssh/authorized_keys
# Pour le confort de chacun
# Le fihcier .customDocker.sh contient
# DEBIAN_FRONTEND=noninteractive apt-get install -y joe
# DEBIAN_FRONTEND=noninteractive apt-get install -y emacs
# DEBIAN_FRONTEND=noninteractive apt-get install -y vim
if [ -f "${VAGRANT_SRC_DIR}/.customDocker.sh" ]; then
chmod a+x "${VAGRANT_SRC_DIR}/.customDocker.sh"
"${VAGRANT_SRC_DIR}/.customDocker.sh"
fi
# Localisation du $LANG, en par défaut, timezone Paris
if [ -z "${HOSTLANG}" ] ; then
HOSTLANG="en_US.UTF-8"
@ -71,23 +63,18 @@ export DebugLog="${VAGRANT_SRC_DIR}/log/log-vagrant-$(date +%y-%m-%d-%T)-"
dpkg-reconfigure --frontend=noninteractive locales || true # don't fail for a locales problem
update-locale LANG=${HOSTLANG} || true # don't fail for a locales problem
echo -e "\n #### create user\n"
# Creation des utilisateurs
echo -e "\n #### create user\n"
usermod -p $(mkpasswd --method=sha-512 root) root
useradd -m -s "/bin/bash" -p $(mkpasswd --method=sha-512 debian) debian || true # don't fail if user already exists
# augmentation de la taille de /run si lowmem
#echo "tmpfs /run tmpfs nosuid,noexec,size=26M 0 0" >> /etc/fstab
#mount -o remount /run
# Désactivation de la mise en veille de l'écran
mkdir -p /etc/X11/xorg.conf.d/
rsync -a "${VAGRANT_SRC_DIR}/10-monitor.conf" /etc/X11/xorg.conf.d/
# mv /etc/xdg/autostart/light-locker.desktop /etc/xdg/autostart/light-locker.desktop.bak
DEBIAN_FRONTEND=noninteractive apt-get remove --purge -y light-locker
#faut virer exim, il fout la grouille avec le docker postfix
#faut virer exim, inutile
DEBIAN_FRONTEND=noninteractive apt-get remove --purge -y exim4-base exim4-config exim4-daemon-light
#login ssh avec mot de passe
@ -131,8 +118,8 @@ EOF
echo -e "[Configuration]\nShortcutsNoMnemonics=TRUE" >> "${TERM_CFG}"
fi
echo -e "\n #### set swapspace\n"
# free swapspace at shutdown
echo -e "\n #### set swapspace\n"
sed -i -e 's/ExecStart=\/usr\/sbin\/swapspace/ExecStart=\/usr\/sbin\/swapspace\nExecStop=\/usr\/sbin\/swapspace -e/' /lib/systemd/system/swapspace.service
systemctl daemon-reload
@ -146,11 +133,9 @@ SystemMaxFileSize=2M
EOF
fi
#***********DEBUT CERTIF*******************
#*****************ATTENTION: MARCHE PAS (il faut accepter toutes les exceptions de sécurité
# CA et certifs avec mkcert
echo -e "\n #### mkcert\n"
# Récupérer mkcert et générer la CA
DEBIAN_FRONTEND=noninteractive apt-get install -y libnss3-tools
mkdir -p /root/mkcert
@ -169,9 +154,6 @@ EOF
ln -s ../../local/_wildcard.kaz.sns-key.pem /etc/letsencrypt/live/kaz.sns/privkey.pem
fi
#***********FIN CERTIF*******************
# clear apt cache
DEBIAN_FRONTEND=noninteractive apt-get autoremove -y
DEBIAN_FRONTEND=noninteractive apt-get clean
@ -191,22 +173,16 @@ EOF
mkfs.btrfs -f /root/btrfs.img
echo "/root/btrfs.img /var/lib/lxc btrfs loop 0 0" >> /etc/fstab
mount /var/lib/lxc
#losetup -f /root/btrfs.img
#mount /dev/loop0 /var/lib/lxc
sed -i -e "s/template=self.template/template=self.template, bdevtype='btrfs'/" /usr/local/lib/python3.9/dist-packages/backends/LxcBackend.py
# SNSTER KAZ
# cp -ar ${VAGRANT_SRC_DIR}/templates /root
cp -ar ${VAGRANT_SRC_DIR}/snster-kaz /root
# crypto keys
cp -ar /etc/letsencrypt /root/snster-kaz/kaz/prod/
cp -ar /etc/letsencrypt /root/snster-kaz/isp-a/home/
# On monte le filesystem de kaz-prod dans le /kaz de la VM pour le dév (en nofail)
# mkdir /kaz-prod /kaz
# echo "overlay /kaz-prod overlay lowerdir=/var/lib/lxc/sr-masters-bullseye/rootfs,upperdir=/var/lib/lxc/kaz-kaz-prod/overlay/delta,workdir=/var/lib/lxc/kaz-kaz-prod/overlay/work,nofail 0 0" >> /etc/fstab
# echo "/kaz-prod/kaz /kaz none bind,nofail 0 0" >> /etc/fstab
# On lie le filesystem de kaz-prod dans le /kaz de la VM pour le dév
ln -s /var/lib/lxc/kaz-kaz-prod/rootfs/ /kaz-prod
ln -s /kaz-prod/kaz /kaz

162
init.sh
View File

@ -1,162 +0,0 @@
#!/bin/bash
### Personalisation de la VM
cd "$(dirname $0)"
BOLD=''
RED=''
GREEN=''
YELLOW=''
BLUE=''
MAGENTA=''
CYAN=''
NC='' # No Color
NL='
'
mkdir -p ./files/kaz/log/ ./files/kaz/download/ ./files/kaz/git/
chmod a+rxw ./files/kaz/log/ ./files/kaz/download/ ./files/kaz/git/
cp Vagrantfile.dist Vagrantfile
OLD_MEN=$(grep vb.memory Vagrantfile | sed -e 's%.*vb.memory\s*=\s*"\([^"]*\)".*%\1%')
OLD_CUPS=$(grep vb.cpus Vagrantfile | sed -e 's%.*vb.cpus\s*=\s*"\([^"]*\)".*%\1%')
MEM=$(expr $(head -1 /proc/meminfo | awk '{print $2}') / 4096)
CUP=$(expr $(nproc) / 2)
cat <<EOF
${GREEN}${BOLD}
MEM: ${OLD_MEN} => ${MEM}
CUP: ${OLD_CUPS} => ${CUP}
${NC}
Update './Vagrantfile'
EOF
sed -i Vagrantfile \
-e 's%vb.memory\s*=\s*"[^"]*"%vb.memory = "'${MEM}'"%' \
-e 's%vb.cpus\s*=\s*"[^"]*"%vb.cpus = "'${CUP}'"%'
APT_CONF="files/.apt-mirror-config"
if [ -f "${APT_CONF}" ]; then
. "${APT_CONF}"
fi
### Personalisation d'un cache apt
if [ -z "${APT_MIRROR_DEBIAN}" ]; then
APT_MIRROR_DEBIAN=$(grep "deb\s.*/debian[^-]" /etc/apt/sources.list | head -1 | sed -e "s%.*deb\s.*://\([^/]*\)/debian.*%\1%")
fi
if [ -z "${APT_MIRROR_DEBIAN_SECURITY}" ]; then
APT_MIRROR_DEBIAN_SECURITY=$(grep "deb\s.*/debian-security" /etc/apt/sources.list | head -1 | sed -e "s%.*deb\s.*://\([^/]*\)/debian-security.*%\1%")
fi
if [ -z "${APT_MIRROR_UBUNTU}" ]; then
APT_MIRROR_UBUNTU=$(grep "deb\s.*://\([^/]*\)/ubuntu" /etc/apt/sources.list | head -1 | sed -e "s%.*deb\s.*://\([^/]*\)/ubuntu.*%\1%")
fi
if [ -z "${APT_MIRROR_UBUNTU_SECURITY}" ]; then
APT_MIRROR_UBUNTU_SECURITY=$(grep "deb\s.*://\([^/]*\)/ubuntu.*-security" /etc/apt/sources.list | head -1 | sed -e "s%.*deb\s.*://\([^/]*\)/ubuntu.*%\1%")
fi
if [ -z "${APT_MIRROR_UBUNTU}" ]; then
APT_MIRROR_UBUNTU="${APT_MIRROR_DEBIAN}"
fi
if [ -z "${APT_MIRROR_UBUNTU_SECURITY}" ]; then
APT_MIRROR_UBUNTU_SECURITY="${APT_MIRROR_DEBIAN_SECURITY}"
fi
while : ; do
cat <<EOF
${GREEN}${BOLD}
APT_MIRROR_DEBIAN=${APT_MIRROR_DEBIAN}
APT_MIRROR_DEBIAN_SECURITY=${APT_MIRROR_DEBIAN_SECURITY}
APT_MIRROR_UBUNTU=${APT_MIRROR_UBUNTU}
APT_MIRROR_UBUNTU_SECURITY=${APT_MIRROR_UBUNTU_SECURITY}
${NC}
EOF
read -p "Update '${APT_CONF}' (ip:port or y/n)? [no] " proxy
case "${proxy}" in
*:* )
APT_MIRROR_DEBIAN=${proxy}
APT_MIRROR_DEBIAN_SECURITY=${proxy}
APT_MIRROR_UBUNTU=${proxy}
APT_MIRROR_UBUNTU_SECURITY=${proxy}
;;
[YyOo]* )
cat > "${APT_CONF}" <<EOF
# Generated by $(pwd)$(basename $0)
# $(date "+%x %X")
APT_MIRROR_DEBIAN=${APT_MIRROR_DEBIAN}
APT_MIRROR_DEBIAN_SECURITY=${APT_MIRROR_DEBIAN_SECURITY}
APT_MIRROR_UBUNTU=${APT_MIRROR_UBUNTU}
APT_MIRROR_UBUNTU_SECURITY=${APT_MIRROR_UBUNTU_SECURITY}
EOF
break;;
""|[Nn]* ) break;;
* ) echo "Please answer ip:port, yes or no.";;
esac
done
PROXY_CONF="files/.proxy-config"
if [ -f "${PROXY_CONF}" ]; then
FTP_PROXY=$(grep "ftp_proxy" "${PROXY_CONF}" | head -1 | sed -e "s%.*ftp_proxy\s*=\s*.*://\(.*\)%\1%")
HTTP_PROXY=$(grep "http_proxy" "${PROXY_CONF}" | head -1 | sed -e "s%.*http_proxy\s*=\s*.*://\(.*\)%\1%")
HTTPS_PROXY=$(grep "https_proxy" "${PROXY_CONF}" | head -1 | sed -e "s%.*https_proxy\s*=\s*.*://\(.*\)%\1%")
fi
while : ; do
cat <<EOF
${GREEN}${BOLD}
export ftp_proxy=ftp://${FTP_PROXY}
export http_proxy=http://${HTTP_PROXY}
export https_proxy=https://${HTTPS_PROXY}
${NC}
EOF
read -p "proxy in '${PROXY_CONF}' (ip:port, yes or no)? [no] " proxy
case "${proxy}" in
*:* )
FTP_PROXY=${proxy}
HTTP_PROXY=${proxy}
HTTPS_PROXY=${proxy}
;;
[yY]*|[Oo]* )
cat > "${PROXY_CONF}" <<EOF
# Generated by $(pwd)$(basename $0)
# $(date "+%x %X")
export ftp_proxy=ftp://${FTP_PROXY}
export http_proxy=http://${HTTP_PROXY}
export https_proxy=https://${HTTPS_PROXY}
EOF
break;;
""|[Nn]* ) break;;
* ) echo "Please answer ip:port, yes or no.";;
esac
done
CUSTOM_CONF=files/.customDocker.sh
echo
if [ -f "${CUSTOM_CONF}" ]; then
OLD_EDITOR=$(grep install "${CUSTOM_CONF}" | grep "\(joe\|emacs\|vim\)" | head -1 | sed -e "s%.*\(joe\|emacs\|vim\).*%\1%")
fi
while : ; do
read -p "Choose editor in '${CUSTOM_CONF}' (joe, emacs, vim or no)? [${GREEN}${BOLD}${OLD_EDITOR}${NC}] " editor
case "${editor}" in
joe|emacs|vim )
if [ ! -f "${CUSTOM_CONF}" ]; then
echo "#!/bin/bash" > "${CUSTOM_CONF}"
fi
chmod a+x "${CUSTOM_CONF}"
if ! grep -qw "${editor}" "${CUSTOM_CONF}" 2> /dev/null ; then
echo "DEBIAN_FRONTEND=noninteractive apt-get install -y ${editor}" >> "${CUSTOM_CONF}"
echo "rsync -a /vagrant/files/.emacs* /root/" >> "${CUSTOM_CONF}"
fi
break;;
""|[Nn]* ) break;;
* ) echo "Please answer joe, emacs, vim or no.";;
esac
done