Merge pull request 'Migration de la VM vers SNSTER' (#1 ) from develop-snster into master

Reviewed-on: #1
update doc
2023-03-01 15:28:07 +01:00 · 2023-03-01 15:14:33 +01:00 · 2023-03-01 15:11:01 +01:00 · 2023-03-01 15:01:55 +01:00 · 2023-03-01 14:55:48 +01:00 · 2023-02-10 15:37:54 +01:00
7 changed files with 119 additions and 336 deletions
--- a/.gitignore
+++ b/.gitignore
@ -1,10 +1,11 @@
 .apt-mirror-config
 .customDocker.sh
+.customVM.sh
 .proxy-config
 .vagrant
 DEADJOE
-Vagrantfile
 /files/log
 /files/kaz/download
 /files/kaz/git
 /files/kaz/log
+/files/customVM.sh
--- a/README.md
+++ b/README.md
@ -20,10 +20,6 @@ Nous utilisons :

 Vous avez besoin de [vagrant](https://www.vagrantup.com/), [VirtualBox](https://www.virtualbox.org/) et éventuellement git.

-UDP/53 ne doit pas être filtré depuis votre poste (par un firewall d'entreprise par exemple). Pour tester:
-```bash
-# dig @80.67.169.12 www.kaz.bzh
-```

 ## Installation

@ -34,18 +30,14 @@ git clone git+ssh://git@git.kaz.bzh:2202/KAZ/kaz-vagrant.git # pour contribuer
 cd kaz-vagrant/
 git switch develop-snster # dans les 2 cas
 ```
-* Personalisez votre simulateur avec la commande (au besoin ajustez la mémoire et les cpus utilisés dans Vagrantfile) :
-```bash
-vagrant plugin install vagrant-disksize
-vagrant plugin install vagrant-vbguest
-./init.sh  # vous pouvez laisser les choix par défaut
-```
+* (Optionnel) Ajustez éventuellement la mémoire et les cpus utilisés dans Vagrantfile (par défaut 4GB et 2 vCPUs)
+
 * Pour créer tout l'univers Kaz il faut se placer dans le répertoire et lancer la commande :
 ```bash
 vagrant up
 ```

-Cette étape peut-être (très) longue. Notamment, la construction de kaz-prod se fait dans un conteneur LXC, dans lequel les overlays docker passent par un filesystem FUSE beaucoup plus lent qu'en natif...
+Cette étape peut-être (très) longue. Notamment, la construction de kaz-prod se fait dans un conteneur LXC, dans lequel les overlays docker passent par un filesystem plus lent qu'en natif... Comptez entre 40 minutes et quelques heures, selon la connexion réseau et les performances de la machine.


 ## Mise au point
--- a/50
+++ b/50
@ -0,0 +1,50 @@
+# coding: utf-8
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+unless Vagrant.has_plugin?("vagrant-disksize")
+  raise  Vagrant::Errors::VagrantError.new, "vagrant-disksize plugin is missing. Please install it using 'vagrant plugin install vagrant-disksize' and rerun 'vagrant up'"
+end
+
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+
+  required_plugins = %w( vagrant-vbguest vagrant-disksize )
+  _retry = false
+  required_plugins.each do |plugin|
+    unless Vagrant.has_plugin? plugin
+      system "vagrant plugin install #{plugin}"
+      _retry=true
+    end
+  end
+
+  if (_retry)
+    exec "vagrant " + ARGV.join(' ')
+  end
+
+  config.vm.box = "debian/bullseye64"
+  config.vm.hostname = 'kaz-vm'
+  config.disksize.size = '32GB'
+
+  config.vm.provider "virtualbox" do |vb|
+    vb.memory = "4096"
+    vb.cpus = "2"
+    vb.name = "kaz-vm"
+    vb.customize ["modifyvm", :id, "--vram", "64", "--clipboard-mode", "bidirectional", '--graphicscontroller', 'vmsvga', '--natnet1', '192.168.64.0/24']
+    vb.gui = true
+  end
+
+
+
+  #permet d'avoir un répertoire partagé entre la VM et le host
+  config.vm.synced_folder "/tmp/", "/tmp_host"
+  config.vm.synced_folder "files/", "/root/kaz-vagrant"
+
+ config.vm.provision "shell" do |s|
+    s.inline = "/vagrant/files/vm-provision.sh"
+    s.env   = {"KAZGUARD" => "true", "HOSTLANG" => ENV['LANG'], "NOKAZ" => ENV['NOKAZ'], "KAZBRANCH" => ENV['KAZBRANCH']}
+  end
+end
--- a/Vagrantfile.dist
+++ b/Vagrantfile.dist
@ -1,95 +0,0 @@
-# coding: utf-8
-# -*- mode: ruby -*-
-# vi: set ft=ruby :
-
-unless Vagrant.has_plugin?("vagrant-disksize")
-  raise  Vagrant::Errors::VagrantError.new, "vagrant-disksize plugin is missing. Please install it using 'vagrant plugin install vagrant-disksize' and rerun 'vagrant up'"
-end
-
-# All Vagrant configuration is done below. The "2" in Vagrant.configure
-# configures the configuration version (we support older styles for
-# backwards compatibility). Please don't change it unless you know what
-# you're doing.
-Vagrant.configure("2") do |config|
-
-  required_plugins = %w( vagrant-vbguest vagrant-disksize )
-  _retry = false
-  required_plugins.each do |plugin|
-    unless Vagrant.has_plugin? plugin
-      system "vagrant plugin install #{plugin}"
-      _retry=true
-    end
-  end
-
-  if (_retry)
-    exec "vagrant " + ARGV.join(' ')
-  end
-
-  config.vm.box = "debian/bullseye64"
-  config.vm.hostname = 'kaz-vm'
-  config.disksize.size = '32GB'
-
-  # Disable automatic box update checking. If you disable this, then
-  # boxes will only be checked for updates when the user runs
-  # `vagrant box outdated`. This is not recommended.
-  # config.vm.box_check_update = false
-
-  # Create a forwarded port mapping which allows access to a specific port
-  # within the machine from a port on the host machine. In the example below,
-  # accessing "localhost:8080" will access port 80 on the guest machine.
-  # config.vm.network "forwarded_port", guest: 80, host: 8080
-
-  # Create a private network, which allows host-only access to the machine
-  # using a specific IP.
-  # config.vm.network "private_network", ip: "192.168.33.10"
-
-  # Create a public network, which generally matched to bridged network.
-  # Bridged networks make the machine appear as another physical device on
-  # your network.
-  # config.vm.network "public_network"
-
-  # Share an additional folder to the guest VM. The first argument is
-  # the path on the host to the actual folder. The second argument is
-  # the path on the guest to mount the folder. And the optional third
-  # argument is a set of non-required options.
-  # config.vm.synced_folder "data", "/vagrant_data"
-  # config.vm.synced_folder "..", "/root/mi-lxc", create:true, type:"rsync",
-  #  rsync__exclude: [".git/", "zzlocal/", "vagrant/"]
-
-  # Provider-specific configuration so you can fine-tune various
-  # backing providers for Vagrant. These expose provider-specific options.
-  # Example for VirtualBox:
-  #
-  config.vm.provider "virtualbox" do |vb|
-  #   # Display the VirtualBox GUI when booting the machine
-  #  vb.gui = true
-  #
-  #   # Customize the amount of memory on the VM:
-    vb.memory = "4096"
-    vb.cpus="2"
-    vb.name = "kaz-vm"
-    vb.customize ["modifyvm", :id, "--vram", "64", "--clipboard-mode", "bidirectional", '--graphicscontroller', 'vmsvga', '--natnet1', '192.168.64.0/24']
-    vb.gui = true
-
-  end
-
-  # Define a Vagrant Push strategy for pushing to Atlas. Other push strategies
-  # such as FTP and Heroku are also available. See the documentation at
-  # https://docs.vagrantup.com/v2/push/atlas.html for more information.
-  # config.push.define "atlas" do |push|
-  #   push.app = "YOUR_ATLAS_USERNAME/YOUR_APPLICATION_NAME"
-  # end
-
-  # Enable provisioning with a shell script. Additional provisioners such as
-  # Puppet, Chef, Ansible, Salt, and Docker are also available. Please see the
-  # documentation for more information about their specific syntax and use.
-
-  #permet d'avoir un répertoire partagé entre la VM et le host
-  config.vm.synced_folder "/tmp/", "/tmp_host"
-  config.vm.synced_folder "files/", "/root/kaz-vagrant"
-
- config.vm.provision "shell" do |s|
-    s.inline = "/vagrant/files/vm-provision.sh"
-    s.env   = {"KAZGUARD" => "true", "HOSTLANG" => ENV['LANG'], "NOKAZ" => ENV['NOKAZ'], "KAZBRANCH" => ENV['KAZBRANCH']}
-  end
-end
--- a/files/snster-kaz/kaz/prod/provision.sh
+++ b/files/snster-kaz/kaz/prod/provision.sh
@ -80,6 +80,27 @@ fi
 echo -e '#!/bin/sh\n/kaz/bin/container.sh start' >> /etc/rc.local
 chmod +x /etc/rc.local

+# On sauve le proxy APT
+proxy=$(/sbin/ip route | awk '/default/ { print $3 }' | head -1)
+sed -i -e "s/^proxy.*$/proxy=$proxy/" /usr/local/sbin/detect_proxy.sh
+#echo "export http_proxy=\"http://$proxy:3142\"" > /etc/profile.d/proxy.sh
+#echo "export https_proxy=\"http://$proxy:3142\"" >> /etc/profile.d/proxy.sh
+mkdir /root/.docker
+echo "{
+ \"proxies\":
+ {
+   \"default\":
+   {
+     \"httpProxy\": \"http://$proxy:3142\",
+     \"httpsProxy\": \"http://$proxy:3142\",
+     \"noProxy\": \"*.sns,127.0.0.0/8\"
+   }
+ }
+}" > /root/.docker/config.json
+echo "http_proxy=\"http://$proxy:3142\"
+https_proxy=\"http://$proxy:3142\"
+" >> /etc/default/docker
+
 # clear apt cache
 DEBIAN_FRONTEND=noninteractive apt-get autoremove -y
 DEBIAN_FRONTEND=noninteractive apt-get clean
--- a/files/vm-provision.sh
+++ b/files/vm-provision.sh
@ -15,49 +15,41 @@ mkdir -p "${VAGRANT_SRC_DIR}/log/"
 export DebugLog="${VAGRANT_SRC_DIR}/log/log-vagrant-$(date +%y-%m-%d-%T)-"
 (
    echo "########## ********** Start Vagrant $(date +%D-%T)"
-    #pour la résolution de noms dans /etc/hosts
-    SERVICES_LIST="smtp mail ldap www depot tableur pad webmail sondage garradin test-garradin wiki git agora cloud office cachet quotas"

    # Copie de qques fichiers
    cp "${VAGRANT_SRC_DIR}/keyboard" /etc/default/keyboard

-    sysctl -w net.ipv4.ip_forward=1
-
-    # MAJ et install
+    # gestions sources.list
    sed -i -e 's/main.*/main contrib non-free/' /etc/apt/sources.list
-    if [ -f "${VAGRANT_SRC_DIR}/.apt-mirror-config" ]; then
-	# pour ceux qui disposent d'un cache apt local et pas la fibre
-	# suffit d'indiquer "host:port" dans le fichier ".apt-mirror-config"
-	. "${VAGRANT_SRC_DIR}/.apt-mirror-config"
-	sed -i \
-	    -e "s%s\?://deb.debian.org%://${APT_MIRROR_DEBIAN}%g" \
-	    -e "s%s\?://security.debian.org%://${APT_MIRROR_DEBIAN_SECURITY}%g" \
-	    -e "s%s\?://archive.ubuntu.com%://${APT_MIRROR_UBUNTU}%g" \
-	    -e "s%s\?://security.ubuntu.com%://${APT_MIRROR_UBUNTU_SECURITY}%g" \
-	    /etc/apt/sources.list
+    sed -i -e 's/https:/http:/' /etc/apt/sources.list
+    apt-get --allow-releaseinfo-change update
+
+    # Cache APT
+    #DEBIAN_FRONTEND=noninteractive apt-get install -y apt-cacher # apt-cacher-ng does not work well on bullseye
+    #echo "allowed_hosts = *" >> /etc/apt-cacher/apt-cacher.conf
+    #service apt-cacher restart
+    DEBIAN_FRONTEND=noninteractive apt-get install -y squid
+    sed -i -e "s/#http_access allow localnet/http_access allow localnet/" /etc/squid/squid.conf
+    echo "cache_dir aufs /var/spool/squid 5000 14 256
+http_port 3142" >> /etc/squid/squid.conf
+    service squid restart
+    echo "Acquire::http::Proxy \"http://127.0.0.1:3142\";" > /etc/apt/apt.conf.d/01proxy;  # utilisation de apt-cacher-ng
+    # Ajouter http://www.squid-cache.org/Doc/config/cache_peer/ à squid pour un proxy upstream
+
+    # Pour le confort de chacun, un customVM.sh optionnel
+    if [ -f "${VAGRANT_SRC_DIR}/customVM.sh" ]; then
+	     bash "${VAGRANT_SRC_DIR}/customVM.sh"
    fi

-    DEBIAN_FRONTEND=noninteractive apt-get --allow-releaseinfo-change update
+    # MAJ et Install
    DEBIAN_FRONTEND=noninteractive apt-get -y upgrade
    DEBIAN_FRONTEND=noninteractive apt-get -y dist-upgrade
-    DEBIAN_FRONTEND=noninteractive apt-get install -y apg curl git sudo unzip rsync firefox-esr tcpdump net-tools mousepad wireshark swapspace whois ldap-utils python3-lxc lxc python3-pygraphviz python3-pil python3-yaml imagemagick btrfs-progs # could be with --no-install-recommends
+    DEBIAN_FRONTEND=noninteractive apt-get install -y apg curl git sudo unzip rsync firefox-esr tcpdump net-tools mousepad wireshark swapspace whois python3-lxc lxc python3-pygraphviz python3-pil python3-yaml imagemagick btrfs-progs # could be with --no-install-recommends
    DEBIAN_FRONTEND=noninteractive apt-get install -y xfce4 lightdm xfce4-terminal xserver-xorg gitk # needs to install recommends

    ssh-keygen -t rsa -b 4096 -N '' <<<$'\ny'
    rsync /root/.ssh/id_rsa.pub /root/.ssh/authorized_keys

-    # Pour le confort de chacun
-    # Le fihcier .customDocker.sh contient
-    # DEBIAN_FRONTEND=noninteractive apt-get install -y joe
-    # DEBIAN_FRONTEND=noninteractive apt-get install -y emacs
-    # DEBIAN_FRONTEND=noninteractive apt-get install -y vim
-    if [ -f "${VAGRANT_SRC_DIR}/.customDocker.sh" ]; then
-	chmod a+x "${VAGRANT_SRC_DIR}/.customDocker.sh"
-	"${VAGRANT_SRC_DIR}/.customDocker.sh"
-    fi
-
-
-
    # Localisation du $LANG, en par défaut, timezone Paris
    if [ -z "${HOSTLANG}" ] ; then
 	     HOSTLANG="en_US.UTF-8"
@ -71,23 +63,18 @@ export DebugLog="${VAGRANT_SRC_DIR}/log/log-vagrant-$(date +%y-%m-%d-%T)-"
    dpkg-reconfigure --frontend=noninteractive locales || true  # don't fail for a locales problem
    update-locale LANG=${HOSTLANG} || true   # don't fail for a locales problem

-
-    echo -e "\n    #### create user\n"
    # Creation des utilisateurs
+    echo -e "\n    #### create user\n"
    usermod -p $(mkpasswd --method=sha-512 root) root
    useradd -m -s "/bin/bash" -p $(mkpasswd --method=sha-512 debian) debian || true # don't fail if user already exists

-    # augmentation de la taille de /run si lowmem
-    #echo "tmpfs /run tmpfs nosuid,noexec,size=26M 0  0" >> /etc/fstab
-    #mount -o remount /run
-
    # Désactivation de la mise en veille de l'écran
    mkdir -p /etc/X11/xorg.conf.d/
    rsync -a "${VAGRANT_SRC_DIR}/10-monitor.conf" /etc/X11/xorg.conf.d/
    # mv /etc/xdg/autostart/light-locker.desktop /etc/xdg/autostart/light-locker.desktop.bak
    DEBIAN_FRONTEND=noninteractive apt-get remove --purge -y light-locker

-    #faut virer exim, il fout la grouille avec le docker postfix
+    #faut virer exim, inutile
    DEBIAN_FRONTEND=noninteractive apt-get remove --purge -y exim4-base exim4-config exim4-daemon-light

    #login ssh avec mot de passe
@ -131,8 +118,8 @@ EOF
 	     echo -e "[Configuration]\nShortcutsNoMnemonics=TRUE" >> "${TERM_CFG}"
    fi

-    echo -e "\n    #### set swapspace\n"
    # free swapspace at shutdown
+    echo -e "\n    #### set swapspace\n"
    sed -i -e 's/ExecStart=\/usr\/sbin\/swapspace/ExecStart=\/usr\/sbin\/swapspace\nExecStop=\/usr\/sbin\/swapspace -e/' /lib/systemd/system/swapspace.service
    systemctl daemon-reload

@ -146,11 +133,9 @@ SystemMaxFileSize=2M
 EOF
    fi

-    #***********DEBUT CERTIF*******************
-    #*****************ATTENTION:  MARCHE PAS (il faut accepter toutes les exceptions de sécurité
+    # CA et certifs avec mkcert

    echo -e "\n    #### mkcert\n"
-    # Récupérer mkcert et générer la CA
    DEBIAN_FRONTEND=noninteractive apt-get install -y libnss3-tools

    mkdir -p /root/mkcert
@ -169,9 +154,6 @@ EOF
       ln -s ../../local/_wildcard.kaz.sns-key.pem /etc/letsencrypt/live/kaz.sns/privkey.pem
    fi

-
-    #***********FIN CERTIF*******************
-
    # clear apt cache
    DEBIAN_FRONTEND=noninteractive apt-get autoremove -y
    DEBIAN_FRONTEND=noninteractive apt-get clean
@ -191,22 +173,16 @@ EOF
    mkfs.btrfs -f /root/btrfs.img
    echo "/root/btrfs.img	/var/lib/lxc	btrfs	loop	0	0" >> /etc/fstab
    mount /var/lib/lxc
-    #losetup -f /root/btrfs.img
-    #mount /dev/loop0 /var/lib/lxc
    sed -i -e "s/template=self.template/template=self.template, bdevtype='btrfs'/" /usr/local/lib/python3.9/dist-packages/backends/LxcBackend.py

    # SNSTER KAZ
-    # cp -ar ${VAGRANT_SRC_DIR}/templates /root
    cp -ar ${VAGRANT_SRC_DIR}/snster-kaz /root

    # crypto keys
    cp -ar /etc/letsencrypt /root/snster-kaz/kaz/prod/
    cp -ar /etc/letsencrypt /root/snster-kaz/isp-a/home/

-    # On monte le filesystem de kaz-prod dans le /kaz de la VM pour le dév (en nofail)
-#    mkdir /kaz-prod /kaz
-#    echo "overlay	/kaz-prod	overlay	lowerdir=/var/lib/lxc/sr-masters-bullseye/rootfs,upperdir=/var/lib/lxc/kaz-kaz-prod/overlay/delta,workdir=/var/lib/lxc/kaz-kaz-prod/overlay/work,nofail  0 0" >> /etc/fstab
-#    echo "/kaz-prod/kaz /kaz  none  bind,nofail  0 0" >> /etc/fstab
+    # On lie le filesystem de kaz-prod dans le /kaz de la VM pour le dév
    ln -s /var/lib/lxc/kaz-kaz-prod/rootfs/ /kaz-prod
    ln -s /kaz-prod/kaz /kaz

--- a/init.sh
+++ b/init.sh
@ -1,162 +0,0 @@
-#!/bin/bash
-
-### Personalisation de la VM
-
-cd "$(dirname $0)"
-
-BOLD='[1m'
-RED='[0;31m'
-GREEN='[0;32m'
-YELLOW='[0;33m'
-BLUE='[0;34m'
-MAGENTA='[0;35m'
-CYAN='[0;36m'
-NC='[0m' # No Color
-NL='
-'
-
-mkdir -p ./files/kaz/log/ ./files/kaz/download/ ./files/kaz/git/
-chmod a+rxw ./files/kaz/log/ ./files/kaz/download/ ./files/kaz/git/
-
-cp Vagrantfile.dist Vagrantfile
-
-OLD_MEN=$(grep vb.memory Vagrantfile | sed -e 's%.*vb.memory\s*=\s*"\([^"]*\)".*%\1%')
-OLD_CUPS=$(grep vb.cpus Vagrantfile | sed -e 's%.*vb.cpus\s*=\s*"\([^"]*\)".*%\1%')
-MEM=$(expr $(head -1  /proc/meminfo | awk '{print $2}') / 4096)
-CUP=$(expr $(nproc) / 2)
-
-cat <<EOF
-${GREEN}${BOLD}
-  MEM: ${OLD_MEN} => ${MEM}
-  CUP: ${OLD_CUPS} => ${CUP}
-${NC}
-Update './Vagrantfile'
-EOF
-
-sed -i Vagrantfile \
-    -e 's%vb.memory\s*=\s*"[^"]*"%vb.memory = "'${MEM}'"%' \
-    -e 's%vb.cpus\s*=\s*"[^"]*"%vb.cpus = "'${CUP}'"%'
-
-
-APT_CONF="files/.apt-mirror-config"
-if [ -f "${APT_CONF}" ]; then
-    . "${APT_CONF}"
-fi
-
-### Personalisation d'un cache apt
-if [ -z "${APT_MIRROR_DEBIAN}" ]; then
-    APT_MIRROR_DEBIAN=$(grep "deb\s.*/debian[^-]" /etc/apt/sources.list | head -1 | sed -e "s%.*deb\s.*://\([^/]*\)/debian.*%\1%")
-fi
-if [ -z "${APT_MIRROR_DEBIAN_SECURITY}" ]; then
-    APT_MIRROR_DEBIAN_SECURITY=$(grep "deb\s.*/debian-security" /etc/apt/sources.list | head -1 | sed -e "s%.*deb\s.*://\([^/]*\)/debian-security.*%\1%")
-fi
-if [ -z "${APT_MIRROR_UBUNTU}" ]; then
-    APT_MIRROR_UBUNTU=$(grep "deb\s.*://\([^/]*\)/ubuntu" /etc/apt/sources.list | head -1 | sed -e "s%.*deb\s.*://\([^/]*\)/ubuntu.*%\1%")
-fi
-if [ -z "${APT_MIRROR_UBUNTU_SECURITY}" ]; then
-    APT_MIRROR_UBUNTU_SECURITY=$(grep "deb\s.*://\([^/]*\)/ubuntu.*-security" /etc/apt/sources.list | head -1 | sed -e "s%.*deb\s.*://\([^/]*\)/ubuntu.*%\1%")
-fi
-
-if [ -z "${APT_MIRROR_UBUNTU}" ]; then
-    APT_MIRROR_UBUNTU="${APT_MIRROR_DEBIAN}"
-fi
-if [ -z "${APT_MIRROR_UBUNTU_SECURITY}" ]; then
-    APT_MIRROR_UBUNTU_SECURITY="${APT_MIRROR_DEBIAN_SECURITY}"
-fi
-
-while : ; do
-    cat <<EOF
-${GREEN}${BOLD}
-APT_MIRROR_DEBIAN=${APT_MIRROR_DEBIAN}
-APT_MIRROR_DEBIAN_SECURITY=${APT_MIRROR_DEBIAN_SECURITY}
-APT_MIRROR_UBUNTU=${APT_MIRROR_UBUNTU}
-APT_MIRROR_UBUNTU_SECURITY=${APT_MIRROR_UBUNTU_SECURITY}
-${NC}
-EOF
-
-    read -p "Update '${APT_CONF}' (ip:port or y/n)? [no] " proxy
-    case "${proxy}" in
-	*:* )
-	    APT_MIRROR_DEBIAN=${proxy}
-	    APT_MIRROR_DEBIAN_SECURITY=${proxy}
-	    APT_MIRROR_UBUNTU=${proxy}
-	    APT_MIRROR_UBUNTU_SECURITY=${proxy}
-	    ;;
-        [YyOo]* )
-	    cat > "${APT_CONF}" <<EOF
-# Generated by $(pwd)$(basename $0)
-# $(date "+%x %X")
-
-APT_MIRROR_DEBIAN=${APT_MIRROR_DEBIAN}
-APT_MIRROR_DEBIAN_SECURITY=${APT_MIRROR_DEBIAN_SECURITY}
-APT_MIRROR_UBUNTU=${APT_MIRROR_UBUNTU}
-APT_MIRROR_UBUNTU_SECURITY=${APT_MIRROR_UBUNTU_SECURITY}
-EOF
-	    break;;
-	""|[Nn]* ) break;;
-        * ) echo "Please answer ip:port, yes or no.";;
-	
-    esac
-done
-
-
-PROXY_CONF="files/.proxy-config"
-if [ -f "${PROXY_CONF}" ]; then
-    FTP_PROXY=$(grep "ftp_proxy" "${PROXY_CONF}" | head -1 | sed -e "s%.*ftp_proxy\s*=\s*.*://\(.*\)%\1%")
-    HTTP_PROXY=$(grep "http_proxy" "${PROXY_CONF}" | head -1 | sed -e "s%.*http_proxy\s*=\s*.*://\(.*\)%\1%")
-    HTTPS_PROXY=$(grep "https_proxy" "${PROXY_CONF}" | head -1 | sed -e "s%.*https_proxy\s*=\s*.*://\(.*\)%\1%")
-fi
-
-while : ; do
-    cat <<EOF
-${GREEN}${BOLD}
-export ftp_proxy=ftp://${FTP_PROXY}
-export http_proxy=http://${HTTP_PROXY}
-export https_proxy=https://${HTTPS_PROXY}
-${NC}
-EOF
-    read -p "proxy in '${PROXY_CONF}' (ip:port, yes or no)? [no] " proxy
-    case "${proxy}" in
-	*:* )
-	    FTP_PROXY=${proxy}
-	    HTTP_PROXY=${proxy}
-	    HTTPS_PROXY=${proxy}
-	    ;;
-        [yY]*|[Oo]* )
-	    cat > "${PROXY_CONF}" <<EOF
-# Generated by $(pwd)$(basename $0)
-# $(date "+%x %X")
-
-export ftp_proxy=ftp://${FTP_PROXY}
-export http_proxy=http://${HTTP_PROXY}
-export https_proxy=https://${HTTPS_PROXY}
-EOF
-	    break;;
-	""|[Nn]* ) break;;
-        * ) echo "Please answer ip:port, yes or no.";;
-	
-    esac
-done
-
-CUSTOM_CONF=files/.customDocker.sh
-echo
-if [ -f "${CUSTOM_CONF}" ]; then
-    OLD_EDITOR=$(grep install "${CUSTOM_CONF}" | grep "\(joe\|emacs\|vim\)" | head -1 | sed -e "s%.*\(joe\|emacs\|vim\).*%\1%")
-fi
-while : ; do
-    read -p "Choose editor in '${CUSTOM_CONF}' (joe, emacs, vim or no)? [${GREEN}${BOLD}${OLD_EDITOR}${NC}] " editor
-    case "${editor}" in
-        joe|emacs|vim )
-	    if [ ! -f "${CUSTOM_CONF}" ]; then
-		echo "#!/bin/bash" > "${CUSTOM_CONF}"
-	    fi
-	    chmod a+x "${CUSTOM_CONF}"
-	    if ! grep -qw "${editor}" "${CUSTOM_CONF}" 2> /dev/null ; then
-		echo "DEBIAN_FRONTEND=noninteractive apt-get install -y ${editor}" >> "${CUSTOM_CONF}"
-		echo "rsync -a /vagrant/files/.emacs* /root/"  >> "${CUSTOM_CONF}"
-	    fi
-	    break;;
-	""|[Nn]* ) break;;
-        * ) echo "Please answer joe, emacs, vim or no.";;
-    esac
-done
Author	SHA1	Message	Date
francois.lesueur	bdd7f98379	Merge pull request 'Migration de la VM vers SNSTER' (#1 ) from develop-snster into master Reviewed-on: #1	2023-03-01 15:28:07 +01:00
Francois Lesueur	ba1737a1fa	update doc	2023-03-01 15:14:33 +01:00
Francois Lesueur	a878cbd4f2	customvm	2023-03-01 15:11:01 +01:00
Francois Lesueur	63bb4d160f	repassage à un vagrantfile, suppr init.sh	2023-03-01 15:01:55 +01:00
Francois Lesueur	f9b16207d8	passage à squid, de la VM aux dockers	2023-03-01 14:55:48 +01:00
Francois Lesueur	75a4b60f57	apt-cacher in the VM, used during provision then by snster	2023-02-10 15:37:54 +01:00